Cap torque testers for measuring the tightening torque, both during application and during removal, of caps on bottles, drums, containers, jars, flasks, vessels and jerrycans.
The adjustable posts effectively hold a wide range of container shapes and sizes in position, while optional flat and adjustable jaws are available for special profiles. The rugged aluminium design and simple, intuitive operation allow use in the laboratory and in production environments, even by non-expert personnel.
The high accuracy and incredibly fast sampling rate ensure precise and reliable test results, even in quick-action applications directly on the production line.

Would you like help choosing the right product ?
Product families

CAP-TT01 series
- The movable posts and optional fixtures make it possible to handle a wide range of sample shapes and sizes.
- Data output with storage of the values and zeroing when the cap is removed from the bottle help to automate testing processes.
- Password protection prevents unauthorised changes.
- The high-speed sampling rate of 7,000 Hz accurately captures peak torque values.
- 5 selectable units of measurement.
- USB, RS-232, Mitutoyo Digimatic and analogue outputs.
- 1,000-point data memory with statistics and outputs.
- Programmable set point indicators and outputs for pass/fail determination.
- Configurable audio alarms.
- MESUR™ Lite data collection software included.

Torque testers for caps of small bottles
- Bidirectional accuracy of ±1% of the indicated reading
- 8 selectable engineering units: Oz.in., Lb.in., Lb.ft., Nm, cNm, KgfCm, gfCm, Kgfm
- 3 operating modes: Track, Peak and 1st Peak
- Rugged aluminium construction
- The rechargeable NiMH batteries provide 8-10 hours of continuous use. Supplied with AC adapter/charger
- The light, sturdy grip has multiple threaded holes with four fixing screws to fit a wide variety of containers.
- Includes NIST-traceable calibration certificate

Portable cap torque testers
- For cap diameters from 0.65 to 1.55 inches (16.5 – 39.0 mm)
- High-speed sampling rate of 2,000 Hz
- Single-reading USB data output
- Programmable set points with pass/fail indicators
- Battery or external power supply operation
- Configurable audio alarms and key tones
- Real-time load bar graphs with set point indicators
- CE mark
- Made in the USA
- Peak memory for clockwise and counter-clockwise readings, saved and displayed
Technical insights
Using cap torque testers
CAP-TT01 series cap torque testers allow easy and precise measurement of the torque needed to apply or remove the cap of bottles, flasks, jars, tubes and jerrycans.
The measurement is instantaneous and the peak value obtained can be stored. The peak value is used in particular to check the “breakaway torque” of seals or the point of maximum stress on the cap.
The high sampling rate makes it possible to obtain a reliable peak measurement even if the event is of short duration.
Torque measurements on caps for bottles, jars, flasks and vials

The TNP series digital torque meter is a precision instrument for measuring opening and closing torque values of caps for various applications.
The TNP torque meter is used in product quality control in the medical, pharmaceutical and industrial sectors, in research and development and in countless other torque measurement applications. As a cap torque analyser, the TNP repeatedly determines the bottle closing torque and the breakaway torque.
Its large memory capacity can store 1,000 data points, including average, maximum and minimum values. An LED HI-GO-LO comparison function can be used for testing large batches to ensure overall product quality. The TNP is a portable device powered by internal rechargeable batteries or by the universal AC adapter/charger supplied.
Designed with a small footprint, it can easily be moved between the workshop and the laboratory, taking up little space during operation. The TNP torque meter comes as standard with a USB connection and cable for a simple PC/software interface. In combination with the free “DIGITORQ” software, statistical tests, graphs and analyses can be carried out.
Industrial features for applications directly on the production line

The high accuracy ensures reliable results in many industrial quality control applications.
Quick and easy set-up with removable chuck pins that adjust the size of the test diameter. The memory function conveniently stores up to 1000 readings for later retrieval. One-touch operation allows a quick reset for subsequent tests.
The large, easy-to-read LCD display shows torque values in four selectable engineering units. PC connectivity with USB interface and the free DIGITORQ software allows data analysis and graphing in Microsoft® Excel. Portable instrument with a compact, lightweight design and internal rechargeable batteries. Recharge the batteries with the included 120/240 V AC adapter/charger or use the adapter for continuous operation. Selectable measuring modes capture average, peak opening or peak closing values in the clockwise (CW) or counter-clockwise (CCW) direction. Speed up large batch testing with the built-in red/green LED comparator, which responds according to pre-programmed tolerances. The durable heavy-duty die-cast aluminium construction withstands wear and tear.
Features of the CAP-TNP family

The accuracy of ± 0.5% F.S. ensures exact and easily certifiable results.
A variety of applications covered, with ranges from 4.4 in-lb (50 N-cm) up to 88.5 in-lb (10 N-m).
Quick and easy set-up with removable chuck pins that adjust the size of the test diameter.
The memory function conveniently stores up to 1000 readings for later retrieval.
One-touch operation allows a quick reset for subsequent tests.
The large, easy-to-read LCD display shows torque values in four selectable engineering units.
PC connectivity with USB interface and the free DIGITORQ software allow data analysis and graphing in Microsoft® Excel.
Truly portable, with a compact, lightweight design and internal rechargeable batteries. Recharge the batteries with the included 120/240 V AC adapter/charger or use the adapter for continuous operation.
Selectable measuring modes capture average, peak opening or peak closing values in the clockwise (CW) or counter-clockwise (CCW) direction.
Speed up large batch testing with the built-in red/green LED comparator, which responds according to pre-programmed tolerances.
Durable, heavy-duty and wear-resistant aluminium construction.
Applications of cap torque testers

- Measurements on caps of bottles for beverages, spirits, water, fruit juices and milk
- Measurements on caps of bottles for the pharmaceutical industry
- Measurements on caps for cosmetic products
- Measurements on caps with safety closures for the chemical and pharmaceutical industry
- Measurements on caps for food containers, both for end consumers and for the processing industry
- Measurements on caps or products for the preserving industry (preserves, jams, long-life products)
- Measurements during the production of caps and accessories (safety closures)
- Torque measurements on taps and manual valves
- Measurements of the opening and closing force of locks
Easy and practical to use

Cap torque testers are easy to use both on a workbench at the line side and in the metrology laboratory. In addition, the table support is stable and, above all, is not affected by the force applied to the cap during testing. The rugged structure also allows testing of large bottles and containers or caps with a particularly large diameter.
Highly legible front display

The instrument display, located on the front of the instrument, allows easy reading of the measured value and of the functions that have been activated. The backlight allows viewing even in poorly lit environments or directly at the line side.
External connections

On the rear of the instrument there is a connector for connecting USB peripherals, peripherals with serial ports and Digimatic. An analogue signal can also be generated for connection to data acquisition systems.
Acquisition software

The supply includes the MEASUR Lite acquisition software, which allows measurements to be displayed on a PC, torque curves to be acquired and data to be recorded in Excel format.
Accessories for TT-01 series torque testers
Portable printer

Suitable for real-time printing of the measurement results. The printer can also perform statistical calculations on batches of measurements (minimum value, maximum value, average value).
Real-time printing of the measurement report allows rapid certification of the production batch.
Adapters for square bottles

The adapters for square bottles also allow measurement of bottles and containers that are not cylindrical or that have irregular shapes. The screw adjustment allows quick adaptation at product changeover.
Adapters with adjustable jaws

The adapters with adjustable jaws allow measurement of bottles with irregular shapes or that do not stay in a stable position with the standard adapters.
The two parts in contact with the bottle are adjustable and adapt perfectly to containers with irregular or non-cylindrical profiles.
Certified weight for calibration

The certified calibration weight allows a quick, immediate check that the cap torque tester is operating correctly.
The value obtained with the certified weight can be used for a periodic calibration check or for in-house certification of the instrument.
Instrument mounting kit

For use of the certified calibration weight, a mounting kit is available that allows the cap torque tester to be placed in an optimal position for fitting the calibrator.
The cap torque tester is fixed to a horizontal surface, a table or a shelf.
Clamping posts

Different versions of clamping posts are available, with different lengths depending on the need to hold bottles of different heights.
The standard posts are 31 mm long. Posts 63 mm and 100 mm long are also available.
Cap torque testers with customised jaws or jaws made to specific requirements are available.
Calibration report

A calibration report certifying the correct operation of the instrument is available on request.
Carrying case

A carrying case is available for transporting the instrument.
Made of plastic with a foam interior, this case allows the cap torque tester to be transported safely.
DataSink 100 software

If special software is needed, with particular acquisition functions or integrated into the management system (AS400 connection, Oracle database connection, connection to Access or MySQL), a customised application can be developed and supplied on a turnkey basis.
Typical torque values
The following table shows typical torque values for glass and plastic bottles with different types of common caps. The (C) value is the closing torque, the (A) value is the opening torque.
All values are expressed in Ncm
| Cap diameter (mm) | Phenolic/urea cap on glass bottle | Phenolic/urea cap on plastic bottle |
| 15 | 90(C)-45(A) | 67(C)-33(A) |
| 18 | 101(C)-56(A) | 79(C)-45(A) |
| 20 | 112(C)-56(A) | 90(C)-45(A) |
| 22 | 124(C)-67(A) | 101(C)-56(A) |
| 24 | 135(C)-67(A) | 112(C)-56(A) |
| 28 | 158(C)-79(A) | 135(C)-67(A) |
| 33 | 203(C)-101(A) | 169(C)-79(A) |
| 38 | 225(C)-112(A) | 192(C)-79(A) |
| 43 | 248(C)-124(A) | 203(C)-101(A) |
| 48 | 271(C)-158(A) | 225(C)-112(A) |
| 58 | 316(C)-158(A) | 271(C)-135(A) |
| 70 | 395(C)-203(A) | 316(C)-158(A) |
| 89 | 508(C)-248(A) | 406(C)-208(A) |
| 100 | 564(C)-282(A) | 451(C)-225(A) |
| Cap diameter (mm) | PE/PP cap on glass bottle | PE/PP cap on plastic bottle |
| 15 | 135(C)-79(A) | 90(C)-45(A) |
| 18 | 146(C)-90(A) | 101(C)-56(A) |
| 20 | 169(C)-101(A) | 112(C)-56(A) |
| 22 | 192(C)-112(A) | 124(C)-67(A) |
| 24 | 203(C)-124(A) | 135(C)-67(A) |
| 28 | 237(C)-135(A) | 158(C)-79(A) |
| 33 | 271(C)-158(A) | 192(C)-90(A) |
| 38 | 327(C)-192(A) | 214(C)-101(A) |
| 43 | 372(C)-225(A) | 248(C)-124(A) |
| 48 | 293(C)-248(A) | 271(C)-135(C) |
| 58 | 497(C)-293(A) | 327(C)-158(A) |
| 70 | 587(C)-361(A) | 395(C)-192(A) |
| 89 | 734(C)-451(A) | 508(C)-248(A) |
| 100 | 847(C)-429(A) | 564(C)-282(A) |
Products used in this application
Torque meters
DATASINK 100 data acquisition software
EDAC acquisition modules
Copyright by RODER SRL – All rights reserved – Application note AN0071
Copyright by RODER SRL – Oglianico (TO) – Italy
Website: www.roder.it
Machine vision division: www.rodervision.com
Measuring instruments division: www.innovacheck.com








You must be logged in to post a comment.