RODER presents the new REDAM LDM series of giant displays for building display and monitoring systems to be connected to LDM series LASER distance meters for distance monitoring.
Would you like help choosing the right product ?
Related products
The REDAM LDM series has been specifically developed for connection to LDM series LASER distance meters, allowing real-time display of the measurement taken by the LASER distance meter.
The measurement is shown on a giant display, visible even from a great distance, or transmitted to remote terminals via Wi-Fi or Ethernet networks.
All the measurements displayed can be compared with tolerance thresholds so as to generate alarms in the event of out-of-tolerance values when certain thresholds are exceeded, or visual signals that guide the operator through any adjustment operations (a red value indicates out of tolerance, a yellow value indicates a warning, a green value means the measurement is acceptable).
Typical applications
- Diameter inspection of reels and coils
- Distance monitoring
- Dimensional measurement of billets, blooms and slabs
- Position control of overhead cranes with anti-collision or parallelism control function
- Loop control on unwinders and rewinders
- Position measurement of trolleys
- Cutting position measurement on mobile carriages
Products used in this application
LASER distance sensors series LDM40
- LASER distance meters for distance measurements up to 30 metres on natural surfaces or 100 metres on reflective surfaces
- 12-24 Vdc power supply
- Analogue, RS232, RS422, Profinet, Profibus and Ethernet/IP interfaces
- Visible (red) LASER emitter with safety class 2
- Accuracy up to +/- 1 mm and resolution up to 0.1 mm
- Wide range of accessories for high-temperature environments or for environments with high levels of contaminants
| Code | Model | Description |
|---|---|---|
15-09-96 | LDM42A-RS422 | LDM42 series LASER distance meter with RS422 serial port and 50 Hz response time |
REDAM series giant monitor
- Giant monitor in 32, 40, 55 inch format or larger
- 230 Vac power supply
- HDMI interfaces for direct connection to RODER Logobrain series devices
- Standard VESA mount for wall mounting or mounting on a control desk
| Code | Model | Description |
|---|---|---|
| XX-XX-XX | REDAM-32P-MON | 32-inch monitor with VESA mount and HDMI video input |
| XX-XX-XX | REDAM-40P-MON | 40-inch monitor with VESA mount and HDMI video input |
| XX-XX-XX | REDAM-55P-MON | 55-inch monitor with VESA mount and HDMI video input |
| XX-XX-XX | REDAM-32P-TV | 32-inch TV with VESA mount and HDMI video input |
| XX-XX-XX | REDAM-40P-TV | 40-inch TV with VESA mount and HDMI video input |
| XX-XX-XX | REDAM-55P-TV | 55-inch TV with VESA mount and HDMI video input |
LASER-Logobrain connection cables
- Connection and power cable for RODER Logobrain systems and LDM series LASER distance meters
- A single cable to power the sensor and transmit data
| Code | Model | Description |
|---|---|---|
| XX-XX-XX | LDM-CV-6P-05M | Power and data transmission cable for LDM, length 5 metres |
| XX-XX-XX | LDM-CV-6P-10M | Power and data transmission cable for LDM, length 10 metres |
| XX-XX-XX | LDM-CV-6P-20M | Power and data transmission cable for LDM, length 20 metres |
| XX-XX-XX | LDM-CV-6P-30M | Power and data transmission cable for LDM, length 30 metres |
| XX-XX-XX | LDM-CV-6P-40M | Power and data transmission cable for LDM, length 40 metres |
| XX-XX-XX | LDM-CV-6P-50M | Power and data transmission cable for LDM, length 50 metres |
LOGOBRAIN LDM series electronic controller
- Embedded electronic controller with integrated diskless and fanless processor
- Standard 12-24 Vdc power supply
- Connection interfaces for LASER distance meters and REDAM remote display systems
- Pre-installed software for quick and easy commissioning
- Continuous monitoring of data from LASER distance meters or other types of sensors with serial data output
- Highly robust aluminium housing suitable for heavily contaminated environments
| Code | Model | Description |
|---|---|---|
| XX-XX-XX | LGB-STD-422-24V | LOGOBRAIN LDM series electronic controller with 24 VDC power supply and HDMI video output |
Bracket for wall mounting of monitors
- Bracket for mounting on a wall, on a vertical post or on a support base (application on a control desk)
- Standard VESA mount
- High robustness and stability
| Code | Model | Description |
|---|---|---|
| XX-XX-XX | HLD-100 | Wall or post mounting bracket with VESA 100 mount |
| XX-XX-XX | HLD-200 | Wall or post mounting bracket with VESA 200 mount |
| XX-XX-XX | HLD-300 | Wall or post mounting bracket with VESA 300 mount |
Protective housing for LDM40 series LASER distance meter
- Protective housing for LDM40 series LASER distance meters
- Protection against impact and dust
- Active pressurisation of the internal chamber to prevent the ingress of solid contaminants or dust
- Suitable for protecting sensors, LASER distance meters, cameras or optical systems in general
| Code | Model | Description |
|---|---|---|
| XX-XX-XX | CST-200 | Protective housing for LDM42 series LASER distance meters |
Option for wireless installation
For applications where a wireless connection is required, or where the distance between sensor and monitor cannot easily be handled with a cable connection, an additional kit can be supplied that manages the Wi-Fi connection between the laser sensor and the display monitor.
The Wi-Fi connection kit can use the existing IT network infrastructure or create a new independent, stand-alone wireless network, making the application completely independent of existing systems.
Typical applications of LASER distance meters
- Process monitoring in steelworks, rolling mills, shears, cutting lines and pickling lines.
- Distance measurement on incandescent steel at temperatures up to 1300 °C
- Level measurement in silos, stockpiles, storage areas and warehouses
- Position monitoring of cranes, conveying and storage systems
- Position monitoring of vehicles, means of transport and vessels
- Control of lifting equipment
- Measurement of lifting height and positioning of lifts
- General distance measurement and position monitoring in automated warehouses
- Diameter measurement of rolls, reels and coils
- Distance measurement in mining, construction, forestry and materials handling technologies
- Detection of the thickness, length and width of metal products
- Diameter measurement of pipes and large workpieces
- Detection of fast-moving objects
- Use as a proximity switch
- 2D and 3D scanning applications
- Precision altimeters for cranes and overhead cranes
- Measurement of deformation and oscillation of large structures such as dams, bridges and skyscrapers
- Monitoring of mountain slopes or critical points.
- Measurement of slabs, blooms, billets or semi-finished products in the metallurgical and steel industry
- Cutting position measurement for saws and cut-off machines
- Material feed control on stamping presses
- Measurement of material winding or unwinding on reels or accumulation drums
- Loop control on cut-to-length and slitting lines
- Speed and position measurement on moving targets
- Level control of paints, glues and chemicals in tanks and drums
- Measurement and control of the position of ships in port or approaching the quay
Other applications with LASER distance meters
Level measurement in tanks, silos or large containers with level display on remote monitors.
The LASER distance meter allows fast and precise measurement even of liquid products where the reflectivity of the surface is sufficient for the LASER spot to be detected.
The LASER distance meter is a valid replacement for the traditional contact float or the ultrasonic detector.
Measurement of length, diameter, ovality and position in the wood sector.
With LASER distance meters it is possible to measure the position of logs or sections of material before processing.
The position, thickness, length or diameter data can be transmitted in real time to PLC, HMI or SCADA systems.
The irregularity of the wood surface is not a problem, as LDM series LASER distance meters constantly correct the operating parameters to guarantee precise and reliable measurement.
Dimensional inspection in the paper and textile industry.
Loop and position control of the web or belt, even with materials that change colour or surface appearance.
Real-time measurement of reel diameter during winding or unwinding operations.
The distance measurement can be transmitted in real time to the line controller (PLC or SCADA) or shown on a display or giant monitor.
Measurement and dimensional inspection in the metal industry.
The characteristics of LDM series LASER distance meters allow precise and reliable measurement even at high temperatures, in the presence of fumes and vapours or on hot surfaces.
Problems of heat or light emission from the target to be detected can be eliminated or greatly reduced by using protective housings or installing optical filters.
Dimensional control in the metallurgical sector, in both hot and cold applications.
The LASER distance meter can provide in real time the position, distance and dimensions (thickness, width, length) of slabs, blooms and billets, both at ambient temperature and at high temperatures.
Problems of heat or light emission from the target to be detected can be eliminated or greatly reduced by using protective housings or installing optical filters
Position measurement on overhead cranes with anti-collision function.
LDM family LASER distance meters allow real-time detection of position and distance on overhead cranes and cranes, providing the anti-collision function.
Installing LASER distance meters also makes it possible to detect the parallelism or lack of synchronisation of the two side girders.
The position, distance or positioning differential can also be shown on giant monitors, or alarms or remote signals can be generated on the control systems.
Supervision of railway infrastructure.
Detection of the position and speed of trains and moving parts.
The ability to measure distances of up to 3 km makes it possible to detect objects that move over long distances or that must be intercepted at long range.
The ability to work on very different surfaces, or with very large variations in colour and reflectivity, makes it possible to measure distance, position and speed even on objects that differ greatly from one another.
Measurement and control of the position, deformation and vibration of large structures, or of structures located at very long distances.
The ability to work on very different surfaces, or with very large variations in colour and reflectivity, makes it possible to measure distance, position and oscillation even on objects that differ greatly from one another. The use of intelligent data loggers allows constant, continuous monitoring even over observation periods of weeks or months.
Remote data transmission also allows several measuring points or several structures to be monitored from a single observation and control point.
Measurement and control of the position, deformation and vibration of large structures, or of structures located at very long distances.
The ability to work on very different surfaces, or with very large variations in colour and reflectivity, makes it possible to measure distance, position and oscillation even on objects that differ greatly from one another.
The use of intelligent data loggers allows constant, continuous monitoring even over observation periods of weeks or months.
Remote data transmission also allows several measuring points or several structures to be monitored from a single observation and control point.
Technical characteristics of REDAM-LDM systems
REDAM-LDM series systems are suited to measurement and control applications in industry, geology, railways and ports
- Wide detection ranges
- Distance measurements up to 30 m without reflector
- Distance measurement up to 3000 m with a suitable reflective system or with particularly reflective targets
- High detection accuracy
- Optoelectronic measurement methods with latest-generation optical and electronic components
- Accuracy up to ±1 mm
- Constant accuracy regardless of target distance
- Easy integration into automation systems or data acquisition systems
- Flexible parameterisation of all working parameters and of the interface with the outside world
- Easy adaptation to the application and to the type of installation
- A range of interfaces suited to industry
- Data output 4-20 mA, Profibus, Industrial Ethernet, RS422, RS485, RS232
- Reliable, robust construction
- Aluminium housings with IP 65 or IP 67 protection rating
- Integrated heating for outdoor applications
- Use in bright outdoor environments with a high proportion of constant or diffuse light
- Safe and harmless
- Visible and infrared laser radiation
- Class 1 or 2 laser
- No particular precautions or additional certification are required for use
Integration with Wi-Fi wireless networks
RODER SRL can provide all the support needed to integrate LASER distance meters in industrial settings or in the structural monitoring sector.
All LASER distance meters can be interfaced via a physical connection (copper cable or optical fibre) or via a wireless connection (Wi-Fi or proprietary radio link).
RODER SRL can supply standard or customised software for continuous monitoring of the physical variables measured by LASER distance meters.
The use of intelligent data loggers allows the monitored physical variables to be checked even over long periods of time, and any anomalies to be reported in real time, even remotely, via web servers or remote control systems.
RODER SRL can supply not only the data acquisition and measurement archiving software but also all the hardware needed to build the final application.
Single- or multi-channel data acquisition units, point-to-point acquisition systems and distributed control systems are available. It is also possible to centralise the data from several distance meters on a single control and data archiving station.
More about LASER rangefinders
The LDM family of LASER rangefinders consists of a range of optoelectronic distance measuring devices for industrial applications, with an analog (4 mA to 20 mA) or digital (Ethernet, Profinet, Profibus, RS232, RS422) interface.
LDM series LASER rangefinders are used for the precise measurement of distances from a few meters up to three kilometers. Distance measurement is an established application of laser technology.
These optical sensors use LASER light (pulsed or modulated) to measure distance, height, length, level and position in a non-contact process. To achieve this, all the components work together in a perfectly coordinated overall system.
Measuring principle
LASER distance meters consist of a laser emitter, a transmitting and receiving optical system, photosensitive semiconductors and sophisticated electronics with algorithms for time measurement or phase measurement.
Various optoelectronic principles are used to determine the measurement, such as time of flight, phase comparison and LASER pulse with back-mixing. These different methods allow individual measurements accurate to the millimetre and measuring ranges of up to several hundred metres.
Reliable and precise measurements
Using LASER distance meters it is possible to measure on natural surfaces or on special reflectors, obtaining fast and precise results.
The LASER distance meters offered by RODER use visible or invisible optical radiation and are classified, in accordance with current regulations, as class 1 or 2 (classes that are safe to operate even without protective eyewear).
The compact design allows easy installation of the LASER distance meter even where space is limited or in industrial applications.
All devices offer standard interfaces, analogue or digital data output and configurable switching outputs. The LDM family of LASER distance meters is widely used for industrial applications with an analogue (4 – 20 mA) or digital interface (Ethernet, Profinet, Profibus, RS232, RS422, SSI).
With the REDAM-LDM family of remote displays it is also possible to monitor processes with multi-point sensors and a multi-sensor acquisition network.
Vuoi un aiuto nella scelta del prodotto ? Copyright by RODER SRL – Oglianico (TO) – Italy
Website: www.roder.it
Machine vision division: www.rodervision.com
Measuring instruments division: www.innovacheck.com
Contacts & Information
Contact for general information : info@roder.it
Machine Vision Division of RODER : www.rodervision.com
RODER Instruments Division : www.innovacheck.com
More about RODER : about us
The information contained in this website is provided for information purposes only. Although it has been prepared with the greatest care, it does not constitute a contractual offer or a binding commitment to supply. It may contain transcription, translation or typographical errors. For precise and up-to-date information, please contact our company directly.
Note: Some images on this website have been intentionally generated using artificial intelligence (AI). This is because, for many applications and projects, photographs of the actual installation or system cannot be disclosed owing to confidentiality agreements, contractual clauses and non-disclosure agreements (NDAs).
Applicazioni correlate :
Level measurement with LASER rangefinders and display on giant screens
Using LASER rangefinders for position and distance measurement
Distance and position measurement with laser distance meters
Distance and position measurement with industrial laser rangefinders
Application Kit for using LDM42 industrial LASER distance meters
You must be logged in to post a comment.