<\/div>\n
Architecture and principles<\/h2>
A multi-gauge station consists of a rigid supporting structure (usually in granite or cast iron), part-locating fixtures, a set of LVDT inductive probes or air gauges arranged in precise positions to measure the features to be checked, and a multi-channel electronic control unit that acquires all the signals simultaneously and converts them into dimensional values. The dedicated software compares the measured values with the tolerances and provides an accept or reject verdict, SPC statistics, a data archive and alarm signals for the process. <\/p>
LVDT probes and air gauges<\/h2>
LVDT inductive probes (Linear Variable Differential Transformer) are position transducers that exploit the variable inductive coupling between a primary and two secondary windings to generate a voltage proportional to the displacement of the moving spindle, with resolutions in the order of a tenth of a micrometer and excellent linearity over the working range. Air gauges use the variation in flow or pressure of air passing through nozzles placed close to the part: the non-contact principle is ideal for delicate surfaces or hot parts. <\/p>
Applications<\/h2>
Multi-gauge stations are used for the dimensional inspection of turned and ground series components (shafts, piston rings, gears, bearings, valves), for verifying the geometric parameters of injectors and hydraulic pumps, for inspecting engine components, and for measuring threads, bores, grooves and radii. The cycle speed, typically a few seconds per part, allows 100% inspection of production and direct integration with the automated line. <\/p>
Software and integration<\/h2>
The software manages automatic calibration of the sensors with reference masters, definition of the acceptance tolerances, calculation of derived values (ovality, conicity, parallelism), dimensional reporting, SPC statistics and capability (Cp\/Cpk), and the interface with PLC and MES for automatic transmission of the verdict. Digital connectivity (Profinet, OPC UA, MQTT) enables integration in an Industry 4.0 environment with cloud storage and process analytics. <\/p>
Selection criteria<\/h2>
The choice of a multi-gauge station depends on the size and geometry of the part, on the number of features to be checked, on the tolerances required, on the acceptable cycle time, on the environmental conditions (temperature, dust, vibration), on integration with the line, and on the flexibility to be adapted to new product codes. Design tailored to the specific application requirements is the norm: every station is a bespoke solution, validated by MSA and Gage R and R analysis before being put into production. <\/p>
The most recent stations include feedback to the machine tool: the dimensional data acquired on the finished part is used to correct the process parameters automatically (tool compensation, machining offsets), achieving a genuine closed-loop manufacturing logic that reduces scrap and increases process stability.<\/p>","protected":false},"excerpt":{"rendered":"
Multi-gauge dimensional and geometric inspection stations (modulcheck, digicheck) with industrial displays.<\/p>\n","protected":false},"author":157040980,"featured_media":26176,"parent":19297,"menu_order":2,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_yoast_wpseo_focuskw":"multi-gauging systems","_yoast_wpseo_title":"Multi-gauging units and systems | RODER","_yoast_wpseo_metadesc":"Multi-gauging units and dimensional inspection stations that measure several dimensions simultaneously with LVDT probes and sensors: configurations and applications.","_coblocks_attr":"","_coblocks_dimensions":"","_coblocks_responsive_height":"","_coblocks_accordion_ie_support":"","_wpcom_ai_launchpad_about_page":false,"_wpcom_ai_launchpad_gallery_page":false,"_wpcom_ai_launchpad_contact_page":false,"_wpcom_ai_launchpad_events_page":false,"_wpcom_ai_launchpad_video_page":false,"_wpcom_ai_launchpad_portfolio_piece":false,"_jetpack_hide_featured_image":false,"_jetpack_featured_image_duplicate_dismissed":0,"footnotes":""},"class_list":["post-21107","page","type-page","status-publish","has-post-thumbnail","hentry"],"yoast_head":"\n
Multi-gauging units and systems | RODER<\/title>\n<meta name=\"description\" content=\"Multi-gauging units and dimensional inspection stations that measure several dimensions simultaneously with LVDT probes and sensors: configurations and applications.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/roder.it\/en\/inspection\/automatic-dimensional-measurement-and-vision-systems\/control-units-and-multi-point-systems\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Multi-gauging units and systems | RODER\" \/>\n<meta property=\"og:description\" content=\"Multi-gauging units and dimensional inspection stations that measure several dimensions simultaneously with LVDT probes and sensors: configurations and applications.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/roder.it\/en\/inspection\/automatic-dimensional-measurement-and-vision-systems\/control-units-and-multi-point-systems\/\" \/>\n<meta property=\"og:site_name\" content=\"RODER SRL\" \/>\n<meta property=\"article:modified_time\" content=\"2026-11-08T22:56:52+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/roder.it\/wp-content\/uploads\/2022\/11\/sistema_di_misura_multiquota_tesa_sonde_lvdt_applicazione.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1087\" \/>\n\t<meta property=\"og:image:height\" content=\"674\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/roder.it\\\/en\\\/inspection\\\/automatic-dimensional-measurement-and-vision-systems\\\/control-units-and-multi-point-systems\\\/\",\"url\":\"https:\\\/\\\/roder.it\\\/en\\\/inspection\\\/automatic-dimensional-measurement-and-vision-systems\\\/control-units-and-multi-point-systems\\\/\",\"name\":\"Multi-gauging units and systems | RODER\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/roder.it\\\/en\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/roder.it\\\/en\\\/inspection\\\/automatic-dimensional-measurement-and-vision-systems\\\/control-units-and-multi-point-systems\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/roder.it\\\/en\\\/inspection\\\/automatic-dimensional-measurement-and-vision-systems\\\/control-units-and-multi-point-systems\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/roder.it\\\/wp-content\\\/uploads\\\/2022\\\/11\\\/sistema_di_misura_multiquota_tesa_sonde_lvdt_applicazione.png\",\"datePublished\":\"2026-05-13T13:39:24+00:00\",\"dateModified\":\"2026-11-08T22:56:52+00:00\",\"description\":\"Multi-gauging units and dimensional inspection stations that measure several dimensions simultaneously with LVDT probes and sensors: configurations and applications.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/roder.it\\\/en\\\/inspection\\\/automatic-dimensional-measurement-and-vision-systems\\\/control-units-and-multi-point-systems\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/roder.it\\\/en\\\/inspection\\\/automatic-dimensional-measurement-and-vision-systems\\\/control-units-and-multi-point-systems\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/roder.it\\\/en\\\/inspection\\\/automatic-dimensional-measurement-and-vision-systems\\\/control-units-and-multi-point-systems\\\/#primaryimage\",\"url\":\"https:\\\/\\\/roder.it\\\/wp-content\\\/uploads\\\/2022\\\/11\\\/sistema_di_misura_multiquota_tesa_sonde_lvdt_applicazione.png\",\"contentUrl\":\"https:\\\/\\\/roder.it\\\/wp-content\\\/uploads\\\/2022\\\/11\\\/sistema_di_misura_multiquota_tesa_sonde_lvdt_applicazione.png\",\"width\":1087,\"height\":674},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/roder.it\\\/en\\\/inspection\\\/automatic-dimensional-measurement-and-vision-systems\\\/control-units-and-multi-point-systems\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/roder.it\\\/en\\\/home\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Inspection\",\"item\":\"https:\\\/\\\/roder.it\\\/en\\\/inspection\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Automatic dimensional measuring systems\",\"item\":\"https:\\\/\\\/roder.it\\\/en\\\/inspection\\\/automatic-dimensional-measurement-and-vision-systems\\\/\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"Control units and multi-gauge systems\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/roder.it\\\/en\\\/#website\",\"url\":\"https:\\\/\\\/roder.it\\\/en\\\/\",\"name\":\"RODER SRL\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/roder.it\\\/en\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/roder.it\\\/en\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/roder.it\\\/en\\\/#organization\",\"name\":\"RODER SRL\",\"url\":\"https:\\\/\\\/roder.it\\\/en\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/roder.it\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/roder.it\\\/wp-content\\\/uploads\\\/2019\\\/05\\\/logo_roder_standard_sfondo_bianco.png\",\"contentUrl\":\"https:\\\/\\\/roder.it\\\/wp-content\\\/uploads\\\/2019\\\/05\\\/logo_roder_standard_sfondo_bianco.png\",\"width\":691,\"height\":80,\"caption\":\"RODER SRL\"},\"image\":{\"@id\":\"https:\\\/\\\/roder.it\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Multi-gauging units and systems | RODER","description":"Multi-gauging units and dimensional inspection stations that measure several dimensions simultaneously with LVDT probes and sensors: configurations and applications.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/roder.it\/en\/inspection\/automatic-dimensional-measurement-and-vision-systems\/control-units-and-multi-point-systems\/","og_locale":"en_US","og_type":"article","og_title":"Multi-gauging units and systems | RODER","og_description":"Multi-gauging units and dimensional inspection stations that measure several dimensions simultaneously with LVDT probes and sensors: configurations and applications.","og_url":"https:\/\/roder.it\/en\/inspection\/automatic-dimensional-measurement-and-vision-systems\/control-units-and-multi-point-systems\/","og_site_name":"RODER SRL","article_modified_time":"2026-11-08T22:56:52+00:00","og_image":[{"width":1087,"height":674,"url":"https:\/\/roder.it\/wp-content\/uploads\/2022\/11\/sistema_di_misura_multiquota_tesa_sonde_lvdt_applicazione.png","type":"image\/png"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/roder.it\/en\/inspection\/automatic-dimensional-measurement-and-vision-systems\/control-units-and-multi-point-systems\/","url":"https:\/\/roder.it\/en\/inspection\/automatic-dimensional-measurement-and-vision-systems\/control-units-and-multi-point-systems\/","name":"Multi-gauging units and systems | RODER","isPartOf":{"@id":"https:\/\/roder.it\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/roder.it\/en\/inspection\/automatic-dimensional-measurement-and-vision-systems\/control-units-and-multi-point-systems\/#primaryimage"},"image":{"@id":"https:\/\/roder.it\/en\/inspection\/automatic-dimensional-measurement-and-vision-systems\/control-units-and-multi-point-systems\/#primaryimage"},"thumbnailUrl":"https:\/\/roder.it\/wp-content\/uploads\/2022\/11\/sistema_di_misura_multiquota_tesa_sonde_lvdt_applicazione.png","datePublished":"2026-05-13T13:39:24+00:00","dateModified":"2026-11-08T22:56:52+00:00","description":"Multi-gauging units and dimensional inspection stations that measure several dimensions simultaneously with LVDT probes and sensors: configurations and applications.","breadcrumb":{"@id":"https:\/\/roder.it\/en\/inspection\/automatic-dimensional-measurement-and-vision-systems\/control-units-and-multi-point-systems\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/roder.it\/en\/inspection\/automatic-dimensional-measurement-and-vision-systems\/control-units-and-multi-point-systems\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/roder.it\/en\/inspection\/automatic-dimensional-measurement-and-vision-systems\/control-units-and-multi-point-systems\/#primaryimage","url":"https:\/\/roder.it\/wp-content\/uploads\/2022\/11\/sistema_di_misura_multiquota_tesa_sonde_lvdt_applicazione.png","contentUrl":"https:\/\/roder.it\/wp-content\/uploads\/2022\/11\/sistema_di_misura_multiquota_tesa_sonde_lvdt_applicazione.png","width":1087,"height":674},{"@type":"BreadcrumbList","@id":"https:\/\/roder.it\/en\/inspection\/automatic-dimensional-measurement-and-vision-systems\/control-units-and-multi-point-systems\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/roder.it\/en\/home\/"},{"@type":"ListItem","position":2,"name":"Inspection","item":"https:\/\/roder.it\/en\/inspection\/"},{"@type":"ListItem","position":3,"name":"Automatic dimensional measuring systems","item":"https:\/\/roder.it\/en\/inspection\/automatic-dimensional-measurement-and-vision-systems\/"},{"@type":"ListItem","position":4,"name":"Control units and multi-gauge systems"}]},{"@type":"WebSite","@id":"https:\/\/roder.it\/en\/#website","url":"https:\/\/roder.it\/en\/","name":"RODER SRL","description":"","publisher":{"@id":"https:\/\/roder.it\/en\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/roder.it\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/roder.it\/en\/#organization","name":"RODER SRL","url":"https:\/\/roder.it\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/roder.it\/en\/#\/schema\/logo\/image\/","url":"https:\/\/roder.it\/wp-content\/uploads\/2019\/05\/logo_roder_standard_sfondo_bianco.png","contentUrl":"https:\/\/roder.it\/wp-content\/uploads\/2019\/05\/logo_roder_standard_sfondo_bianco.png","width":691,"height":80,"caption":"RODER SRL"},"image":{"@id":"https:\/\/roder.it\/en\/#\/schema\/logo\/image\/"}}]}},"jetpack_likes_enabled":false,"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/PaWZeX-5ur","jetpack-related-posts":[{"id":23279,"url":"https:\/\/roder.it\/en\/inspection\/automatic-dimensional-measurement-and-vision-systems\/lvdt-probes-inductive-gauges-and-displays\/","url_meta":{"origin":21107,"position":0},"title":"LVDT probes, inductive gauges and displays","author":"GSM","date":"13 May 2026","format":false,"excerpt":"LVDT linear transducers, inductive gauges and digital displays for precision measurement.","rel":"","context":"Similar post","block_context":{"text":"Similar post","link":""},"img":{"alt_text":"sistemi di misura multiquota TESA digicheck per misure di forma e di planarit\u00e0","src":"https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2022\/11\/sistemi_di_misura_multiquota_digicheck_tesa_lvdt.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2022\/11\/sistemi_di_misura_multiquota_digicheck_tesa_lvdt.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2022\/11\/sistemi_di_misura_multiquota_digicheck_tesa_lvdt.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2022\/11\/sistemi_di_misura_multiquota_digicheck_tesa_lvdt.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2022\/11\/sistemi_di_misura_multiquota_digicheck_tesa_lvdt.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2022\/11\/sistemi_di_misura_multiquota_digicheck_tesa_lvdt.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":19297,"url":"https:\/\/roder.it\/en\/inspection\/automatic-dimensional-measurement-and-vision-systems\/","url_meta":{"origin":21107,"position":1},"title":"Automatic dimensional measuring systems","author":"GSM","date":"13 May 2026","format":false,"excerpt":"Integrated systems for dimensional and geometrical inspection in production and in the laboratory: multi-gauge stations, LVDT, machine vision, CMM.","rel":"","context":"Similar post","block_context":{"text":"Similar post","link":""},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2022\/11\/sistema_di_misura_multiquota_tesa_sonde_lvdt_applicazione.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2022\/11\/sistema_di_misura_multiquota_tesa_sonde_lvdt_applicazione.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2022\/11\/sistema_di_misura_multiquota_tesa_sonde_lvdt_applicazione.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2022\/11\/sistema_di_misura_multiquota_tesa_sonde_lvdt_applicazione.png?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2022\/11\/sistema_di_misura_multiquota_tesa_sonde_lvdt_applicazione.png?resize=1050%2C600&ssl=1 3x"},"classes":[]},{"id":21039,"url":"https:\/\/roder.it\/en\/inspection\/diameter-ovality-profile-and-form\/ring-and-bore-measuring-systems-ring-check\/","url_meta":{"origin":21107,"position":2},"title":"Ring and bore measuring systems (ring check)","author":"GSM","date":"13 May 2026","format":false,"excerpt":"Automatic systems for measuring inner diameter, ovality and geometric quality of rings and bores.","rel":"","context":"Similar post","block_context":{"text":"Similar post","link":""},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":21123,"url":"https:\/\/roder.it\/en\/inspection\/automatic-dimensional-measurement-and-vision-systems\/laser-systems-for-form-flatness-and-multi-gauge-measurement\/","url_meta":{"origin":21107,"position":3},"title":"Laser systems for form, flatness and multi-gauge measurement","author":"GSM","date":"13 May 2026","format":false,"excerpt":"Laser systems for flatness inspection, positioning and geometric measurement on the production line.","rel":"","context":"Similar post","block_context":{"text":"Similar post","link":""},"img":{"alt_text":"digicheck misura planarit\u00e0 con sonde lvdt e controllore elettronico multiquota","src":"https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2023\/03\/digicheck_lvdt_misura_planarita_produzione_bordo_macchina.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2023\/03\/digicheck_lvdt_misura_planarita_produzione_bordo_macchina.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2023\/03\/digicheck_lvdt_misura_planarita_produzione_bordo_macchina.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2023\/03\/digicheck_lvdt_misura_planarita_produzione_bordo_macchina.png?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2023\/03\/digicheck_lvdt_misura_planarita_produzione_bordo_macchina.png?resize=1050%2C600&ssl=1 3x"},"classes":[]},{"id":17990,"url":"https:\/\/roder.it\/en\/inspection\/","url_meta":{"origin":21107,"position":4},"title":"Inspection","author":"GSM","date":"13 May 2026","format":false,"excerpt":"RODER \u00b7 Industrial inspection and measurement Industrial inspection and measurement The Inspection section brings together the pages dedicated to the physical quantities measured in quality control and industrial process control: dimensions and geometry, thickness, speed, force and torque, hardness, temperature, humidity, pressure, defects and vibration. The approach is centred on\u2026","rel":"","context":"Similar post","block_context":{"text":"Similar post","link":""},"img":{"alt_text":"Vision check dynamic controllo di difetti di schede elettroniche e assemblati meccanici","src":"https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2025\/07\/visio_check_dynamic_per_ispezione_linee_a_pallet.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2025\/07\/visio_check_dynamic_per_ispezione_linee_a_pallet.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2025\/07\/visio_check_dynamic_per_ispezione_linee_a_pallet.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2025\/07\/visio_check_dynamic_per_ispezione_linee_a_pallet.png?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2025\/07\/visio_check_dynamic_per_ispezione_linee_a_pallet.png?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/roder.it\/wp-content\/uploads\/2025\/07\/visio_check_dynamic_per_ispezione_linee_a_pallet.png?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":23198,"url":"https:\/\/roder.it\/en\/inspection\/manual-dimensional-measurement\/holders-bases-stands-and-clamping-systems\/","url_meta":{"origin":21107,"position":5},"title":"Holders, bases, stands and clamping systems","author":"GSM","date":"13 May 2026","format":false,"excerpt":"Magnetic bases, columns, holders, clamping and levelling systems for measuring instruments.","rel":"","context":"Similar post","block_context":{"text":"Similar post","link":""},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]}],"_links":{"self":[{"href":"https:\/\/roder.it\/en\/wp-json\/wp\/v2\/pages\/21107","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/roder.it\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/roder.it\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/roder.it\/en\/wp-json\/wp\/v2\/users\/157040980"}],"replies":[{"embeddable":true,"href":"https:\/\/roder.it\/en\/wp-json\/wp\/v2\/comments?post=21107"}],"version-history":[{"count":5,"href":"https:\/\/roder.it\/en\/wp-json\/wp\/v2\/pages\/21107\/revisions"}],"predecessor-version":[{"id":37952,"href":"https:\/\/roder.it\/en\/wp-json\/wp\/v2\/pages\/21107\/revisions\/37952"}],"up":[{"embeddable":true,"href":"https:\/\/roder.it\/en\/wp-json\/wp\/v2\/pages\/19297"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/roder.it\/en\/wp-json\/wp\/v2\/media\/26176"}],"wp:attachment":[{"href":"https:\/\/roder.it\/en\/wp-json\/wp\/v2\/media?parent=21107"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}![\"banner](\"https:\/\/roder.it\/wp-content\/uploads\/2026\/06\/banner_technical_support_choose_products-1024x213.png\")